德赢下载>480d25-hs
480d25-hs
Hover over image to zoom in

480d25-hs

$121.50(USA and Canada only)

Availability: In stock
480 VAC, 25 Amp, DC Control Solid State Relay (SSR), with integrated heatsink
Data Sheet

Production Specification

The 480D25-HS is a DC-controlled HS Series relay that switches 480 VAC at up to 25 A. This SSR features an integrated heatsink. Because there is less thermal resistance internal to the unit than in a standard SSR mounted to the same heat sink, heat dissipates more easily. The built-in heatsink means you don't have to select a heatsink, and installation is much easier.

Each HS-series SSR has built-in hardware for screw mounting and a built-in DIN-rail adapter clip for mounting to a 35mm DIN rail.

HS Series relays provide 4000 volts of isolation between input and output, and offer zero-voltage turn-on and zero-current turn-off. They are UL recognized and are a CE component, UKCA certified.

Lots of information on choosing and using SSRs can be found in theSSR data sheet. Also see theManufacturers' part number cross-reference list.

This SSR carries a终身保修.

Model Number

240D30-HS

480d25-hs

575D30-HS

Nominal AC Line Voltage

240

480

575

工作电压范围（Volts AC）

24–280

100–530

100–600

峰值重复电压最大

600

1000

1200

Off-State Leakage (mA) Maximum*

5 mA

10 mA

12 mA

Nominal Output Voltage Drop (RMS)

1.0 volts

1.0 volts

1.0 volts

Nominal Current Rating (Amps)

30**

25**

30**

1 cycle Surge (Amps) Peak

610

610

610

I2t Rating t=8.3 (ms)

1550

1550

1550

Isolation Voltage (transient 4KV)

2,500VRMS

2,500VRMS

2,500VRMS

Dissipation (Nominal Watts/Amp)

1.0

1.0

1.0

Signal Pick-up Voltage

4VDC
（允许32V）

4VDC
（允许32V）

4VDC
（允许32V）

Signal Drop-out Voltage

1 VDC

1 VDC

1 VDC

Nominal Signal Input Resistance (Ohms)

730

1000

1000

θja*** (°C/Watt)

2.2

2.2

2.2

Warranty

Lifetime

Lifetime

Lifetime
Agency Approvals UL, CE, RoHS UL, CE, RoHS; UKCA UL, CE; UKCA

Notes:
* Operating Frequency: 25 to 65 Hz (operates at 400 Hz with 6 times the offstate leakage).
** Ambient temperature will affect the current rating. For details, see the Thermal Ratings charts in theSolid State Relays Data Sheet(form 0859).
***θja = Thermal resistance junction to ambient. Maximum junction temperature is 110 °C.

1674

Opto 22 SSR Overview

A quick overview of Opto 22 solid-state relays (SSRs).

View

0859

Solid-State Relays (SSRs) Data Sheet

Opto 22 provides a full range of reliable solid-state relays (SSR). This data sheet includes descriptions, specifications, dimensional drawings, and application information.

View

2374

UKCA Declaration of Conformity (ATEX, EMC, LVD, RoHS)

This document is the Manufacturer's Declaration of Conformity for the products listed herein, in accordance with the rules, regulations and standards of the United Kingdom. The models cited have been tested to the essential requirements listed in the Standards section, and fully comply with the legislation as listed in UK Legislation section.

View

1648

Opto 22 RoHS 3 Statement of Compliance - Restriction of Hazardous Substances

This document is a statement of compliance with the EU Directive 2015/863/EU, Restriction of Hazardous Substances (RoHS 3). This document lists Opto 22 products that comply with the substance restrictions of the RoHS 3 directive.

View

1057

UL Approval Document

This document lists all Opto 22 part numbers that have the Underwriters Laboratory (UL) approval.

View
No downloads are available for this product.
No videos or demos are available for this product.