$28.00(USA and Canada only)
MP120D2或P120D2
MP120D4或P120D4
MP240D2或P240D2
MP240D4或P240D4
mp380d4
Nominal AC Line Voltage
120
240
380
Nominal Current Rating (Amps)
2*
4*
1个周期激增(放大器)峰
20
85
名义信号输入阻力(欧姆)
1000
信号拾取电压
3vdc **(24V allowed)
Signal Drop-out Voltage
1 VDC
Peak Repetitive Voltage Maximum
600
800
最大输出电压下降
1.6 volts
Off-State Leakage mA Maximum***
5 mA
Operating Voltage Range (Volts AC)
12–140
24–280
24–420
I2t等级t = 8.3(ms)
2
30
Isolation Voltage
4,000 vRMS
θjc**** °C/Watt
6.5
耗散瓦/放大器
1.2
评分(电动负载)
120 VAC的1 fla6 LRA at 120 VAC
240 VAC的2.5 FLA6 LRA at 240 VAC
120 VAC的1 fla15 LRA在120 VAC
240 VAC的2.5 FLA15 LRA at 240 VAC
2.5 FLA在380 VAC时15 LRA在380 VAC
笔记:*环境温度将影响当前的等级。有关详细信息,请参阅“热等级”图表固态继电器数据表(表格0859)。** = P系列32伏最大。***操作频率:25至65 Hz(以400 Hz的速度运行,偏离泄漏的6倍)。****θJC =从内部连接到底座的热电阻。最大内部连接温度为110°C。
Opto 22提供了一系列可靠的固态继电器(SSR)。该数据表包括描述,规格,尺寸图和应用程序信息。
该文件是根据英国的规则,法规和标准,制造商宣布此处列出的产品的合规性声明。德赢下载引用的模型已经过标准部分中列出的基本要求的测试,并完全符合英国立法部分中列出的立法。
该文件是根据欧洲,国际和/或国家标准法规的制造商宣布此处列出的产品的合规性声明。德赢下载
This document is a statement of compliance with the EU Directive 2015/863/EU, Restriction of Hazardous Substances (RoHS 3). This document lists Opto 22 products that comply with the substance restrictions of the RoHS 3 directive.
本文档列出了所有具有加拿大标准协会(CSA)批准的Opto 22零件号。
This document lists all Opto 22 part numbers that have the Underwriters Laboratory (UL) approval.
This document is the Manufacturer's Declaration for the listed products as mentioned in the attachment - to which this confirmation refers - that they are in accordance with the mentioned European, international and/or national standards and regulations.