GRV-CSERI-4
Hover over image to zoom in

GRV-CSERI-4

$820.00(USA and Canada only)

可用性: Call for Availability
凹槽串行通信模块,4个通道,RS-232或RS-485,通道到通道隔离

生产规范

The GRV-CSERI-4 serial communication module provides 4 independent, isolated serial ports for communication with RS-232 or RS-485 serial devices. The module can communicate with RS-485 serial devices in half-duplex (2-wire transmission) or full-duplex (4-wire transmission) mode.

每个端口均可在RS-232和RS-485之间选择,在RS-485模式下具有可配置的终止和偏置。端口0也可以配置为处理调制解调器命令。支持高达1 Mbps的波特率得到支持。

Part of the凹槽®EPIC system, the GRV-CSERI-4 mounts on any凹槽EPIC®机壳旁边grv-epic-pr1processor and analog and discrete凹槽我/omodules,,,,to provide the mix of signals you need at any location.

凹槽serial modules are directly connected to the processor via the bus on the chassis, so each serial port works like a port that’s built into the processor.凹槽serial modules contain two to four ports, and serial modules can be placed in any of the first four positions on the chassis; so depending on the serial modules you use, you can add up to 8 to 16 serial ports to your GRV-EPIC-PR1.

Note that this direct connection means that an EPIC processor can control serial modules on its own chassis, but it cannot control serial modules on a separate EPIC chassis. Other devices, such as a SNAP PAC controller, also cannot control serial modules on an EPIC chassis.

笔记:This module requires凹槽EPIC Firmware 1.2.0 or higher on your GRV-EPIC-PR1.

特征 Port 0 Port 1 Port 2 Port 3
RS-232 Tx / Rx X X X X
RS-232 RTS / CTS X X X X
RS-232 DCD,DTR,DSR,RI X
RS-485半双链模式(TXRX +/-) X X X X
RS-485 full-duplex Mode (Tx+/-, Rx+/-) X X X X
RS-485 termination (120 Ohms) X X X X
RS-485 Bias (750 Ohms to +V and COM) X X X X
Specification GRV-CSERI-4
Serial Standards RS-232 (DTE), RS-485 half and full duplex
波特率 300桶-1 Mbps
Maximum Cable Length (RS-232) 10 m
Maximum Cable Length (RS-485) 1200 m at 38.4 Kbps, 500 m at 115.2 Kbps, 50 m at 1 Mbps
Bus Loading (RS-485) 1/8单位负载
巴士终止 5 KOHMS(RS-232模式),120欧姆(RS-485模式,可选)
Bus Bias 750欧姆(仅RS-485模式,可选)
Isolation (field-to-logic) 300 V working, 1500 V transient (1 minute)
Isolation (channel-to-channel) 300 V working
Number of Channels 4 individually configurable channels
Indicators 传输和接收每个频道的LED
Chassis Power Consumption 1.5 W
底盘兼容性 Slots 0-3 only. The maximum number of modules per chassis is 4.
Minimum GRV-EPIC-PR1 Firmware Version 1.2.0
Wire Size 28–14 AWG
Torque, connector screw 2.5英寸LB(0.28 N-M)
Torque, hold-down screw 3.5 in-lb (0.4 N-m)
Temperature (operating) -20 °C to +70 °C
Temperature (storage) -40 °C to +85 °C
Relative Humidity (non-condensing) 5–95%
Agency Approvals UL/cUL (Class 1 Div. 2)A; CE, ATEX (Category 3, Zone 2), RoHS; DFARS; CB Scheme; UKCA
Warranty 30 months
AFor use in hazardous locations, equipment must be mounted in an enclosure that meets the requirements of the National Electrical Code, ANSI/NFPA 70, and ANSI/ISA-61010-1 (82.02.01).

凹槽Serial Modules Data Sheet

凹槽®serial modules are part of Opto 22's凹槽EPIC®system。This document includes descriptions, specifications, and wiring and dimensional diagrams for these modules, part numbersGRV-CSERI-4Andgrv-ccani-2(CAN bus).

GROOV I/O模块固件发行笔记

This document lists the latest updates to the firmware for凹槽我/omodules. It includes information on new features, enhancements, and bug fixes.

列表凹槽我/omodule firmware download pages

笔记:This document was formerly called a readme. The name was changed to more accurately describe its content.

UKCA Declaration of Conformity (groov EPIC and groov RIO)

This document is the Manufacturer's Declaration of Conformity for the products listed herein, in accordance with the rules, regulations and standards of the United Kingdom. The models cited have been tested to the essential requirements listed in the Standards section, and fully comply with the legislation as listed in UK Legislation section.

ATEX GROOV EPIC的合格信

This ATEX Letter of Conformity is provided to support CEDeclaration of Conformity (凹槽EPIC and凹槽里约),,,,form 2261.

Press Release: groov EPIC Serial Module

Opto 22释放新的四个端口串行通信模块凹槽史诗般的系统GRV-CSERI-4serial modules expand EPIC system capabilities to add communication with RS-232 and RS-485 serial devices.

Declaration of Conformity (groov EPIC and groov RIO)

This document is the Manufacturer's Declaration of Conformity for the products listed herein, in accordance with European, international, and/or national standards and regulations.

GRV-CSERI-4模块固件

This download contains current firmware for the GRV-CSERI-4 module. For a list of bug fixes and enhancements included in this firmware, see the凹槽我/oModules Firmware readme文档。

You can download the previous version of the firmware by clicking on this link:1.6e,,,,1.6b

No videos or demos are available for this product.