The GRV-IACDCTTLS-24 digital input module can sense the on or off status for up to 24 AC or DC devices with signals between 2.0 and 16 volts. This module provides input on/off state only, offering a lower-cost option for projects that require only point states. Note that the module's 24 channels are not isolated from each other; all channels share a common reference terminal.
GRV-IACDCTTLS-24安装在
凹槽史诗®机壳Alongside a
grv-epic-pr1processor and other digital, analog, and serial
凹槽I/O模块。
NOTE:如果您的应用程序需要其他功能（闩锁，总计等），请参见
GRV-IACDCTTL-24模块。
| 特征 |
GRV-IACDCTTL-24 |
GRV-IACDCTTLS-24 |
| 频道数量 |
24 |
24 |
| Channel-to-channel isolation |
|
|
| 开/关状 |
X |
X |
| 打开/关闭闩锁 |
X |
|
| 开/关 |
X |
|
| 频率测量 |
X |
|
| Period measurement |
X |
|
| 脉冲测量 |
X |
|
| 规格 |
GRV-IACDCTTL-24 |
GRV-IACDCTTLS-24 |
| Input Voltage |
2–16 VAC / VDC |
2–16 VAC / VDC |
| Turn-on Voltage |
2.0 VAC（峰） / VDC |
2.0 VAC（峰） / VDC |
| 关闭电压 |
0.8 VAC（峰） / VDC |
0.8 VAC（峰） / VDC |
| Input Impedance (±5%) |
2个科姆斯 |
2个科姆斯 |
| 最大限度。弗雷克。（50％方波5 VP-P） |
2000 Hz |
N/A |
| IEC Input Type |
N/A |
N/A |
| 隔离（现场到逻辑） |
300 V working, 1500 V transient (1 minute) |
300 V working, 1500 V transient (1 minute) |
| 隔离（通道到通道） |
None |
None |
| Number of Channels |
24 |
24 |
| 底盘功耗 |
1.0 W |
1.0 W |
| Wire Size |
28–14 AWG |
28–14 AWG |
| Torque, connector screw |
2.5英寸LB（0.28 N-M） |
2.5英寸LB（0.28 N-M） |
| Torque, hold-down screw |
3.5 in-lb (0.4 N-m) |
3.5 in-lb (0.4 N-m) |
| Temperature (operating) |
-20°C至+70°C |
-20°C至+70°C |
| 温度（存储） |
-40 °C to +85 °C |
-40 °C to +85 °C |
| Relative Humidity (non-condensing) |
5–95% |
5–95% |
| Agency Approvals |
UL/CUL（1类Div。2）A;CE，ATEX（第3类，第2区），ROHS；dfars;CB方案；UKCA |
| Warranty |
Lifetime |
Lifetime |
A为了在危险地点使用，必须将设备安装在满足国家电气代码要求，ANSI/NFPA 70和ANSI/ISA-61010-1（82.02.01）的外壳中。
|
凹槽®2–16 VAC/VDC输入模块是Opto 22的一部分凹槽史诗®System。本文档包括以下零件编号的描述，规格以及接线和尺寸图：
本文档列出了固件的最新更新凹槽I/O模块。It includes information on new features, enhancements, and bug fixes.
列表凹槽I/O模块固件下载页面
Note: This document was formerly called a readme. The name was changed to more accurately describe its content.
This document is the Manufacturer's Declaration of Conformity for the products listed herein, in accordance with the rules, regulations and standards of the United Kingdom. The models cited have been tested to the essential requirements listed in the Standards section, and fully comply with the legislation as listed in UK Legislation section.
This document is the Manufacturer's Declaration of Conformity for the products listed herein, in accordance with European, international, and/or national standards and regulations.
此ZIP文件包括适用于所有的各种文件格式（PDF，DWG，STP）的图纸凹槽I/O模块。
注意：这些图纸不适用于GROOV RIO模块。
No videos or demos are available for this product.