mp380d4
悬停在图像上以放大

mp380d4

$27.50(USA and Canada only)

可用性: In stock
MP Model, 380 VAC, 4 Amp, DC Control Solid State Relay (SSR)

Production Specification

MP380D4是DC控制的MP系列继电器,最多可在4 A上切换380 VAC。

MP Series power relays are designed for OEMs. They offer a minimum footprint to allow maximum relay density on a printed circuit board.

有关选择和使用SSR的大量信息可以在SSR数据表。也看到Manufacturers' part number cross-reference list

This SSR carries alifetime warranty

MP120D2
or P120D2

MP120D4
or P120D4

MP240D2
或P240D2

MP240D4
或P240D4

mp380d4

Nominal AC Line Voltage

120

120

240

240

380

Nominal Current Rating (Amps)

2*

4*

2*

4*

4*

1个周期激增(放大器)峰

20

85

20

85

85

Nominal Signal Input
阻力(欧姆)

1000

1000

1000

1000

1000

信号拾取电压

3vdc **
(24V allowed)

3vdc **
(24V allowed)

3vdc **
(24V allowed)

3vdc **
(24V allowed)

3vdc **
(24V allowed)

Signal Drop-out Voltage

1 VDC

1 VDC

1 VDC

1 VDC

1 VDC

Peak Repetitive Voltage Maximum

600

600

600

600

800

最大输出电压下降

1.6 volts

1.6 volts

1.6 volts

1.6 volts

1.6 volts

Off-State Leakage mA Maximum***

5 mA

5 mA

5 mA

5 mA

5 mA

Operating Voltage Range (Volts AC)

12–140

12–140

24–280

24–280

24–420

I2t等级t = 8.3(ms)

2

30

2

30

30

Isolation Voltage

4,000 VRMS

4,000 VRMS

4,000 VRMS

4,000 VRMS

4,000 VRMS

θjc**** °C/Watt

20

6.5

20

6.5

6.5

Dissipation Watts/Amp

1.2

1.2

1.2

1.2

1.2

评分(电动负载)

120 VAC的1 fla
6 LRA at 120 VAC

240 VAC的2.5 FLA
6 LRA at 240 VAC

120 VAC的1 fla
15 LRA at 120 VAC

240 VAC的2.5 FLA
15 LRA at 240 VAC

2.5 FLA在380 VAC时
15 LRA在380 VAC

代理商批准 UL, CSA, RoHS, CE; UKCA UL, CSA, RoHS, CE; UKCA UL, CSA, RoHS, CE; UKCA UL, CSA, RoHS, CE; UKCA UL, CSA, RoHS, CE; UKCA

笔记:
*环境温度将影响当前的等级。有关详细信息,请参阅“热等级”图表固态继电器数据表(form 0859).
** = P系列32伏最大。
***操作频率:25至65 Hz(以400 Hz的速度运行,偏离泄漏的6倍)。
****θJC =从内部连接到底座的热电阻​​。最大内部连接温度为110°C。

UKCA宣布合格(EMC,LVD,ROHS)

该文件是根据英国的规则,法规和标准,制造商宣布此处列出的产品的合规性声明。德赢下载引用的模型已经过标准部分中列出的基本要求的测试,并完全符合英国立法部分中列出的立法。

合格声明(EMC,LVD,ROHS)

该文件是根据欧洲,国际和/或国家标准法规的制造商宣布此处列出的产品的合规性声明。德赢下载

Opto 22 ROHS 3合规声明 - 限制有害物质

This document is a statement of compliance with the EU Directive 2015/863/EU, Restriction of Hazardous Substances (RoHS 3). This document lists Opto 22 products that comply with the substance restrictions of the RoHS 3 directive.

CSA Approval Document

本文档列出了所有具有加拿大标准协会(CSA)批准的Opto 22零件号。

UL Approval Document

This document lists all Opto 22 part numbers that have the Underwriters Laboratory (UL) approval.

CE Declaration: Component

This document is the Manufacturer's Declaration for the listed products as mentioned in the attachment - to which this confirmation refers - that they are in accordance with the mentioned European, international and/or national standards and regulations.

CE Declaration: Low Voltage

This document is the Manufacturer's Declaration for the listed products as mentioned in the attachment - to which this confirmation refers - that they are in accordance with the mentioned European, international and/or national standards and regulations.

No downloads are available for this product.
该产品没有视频或演示。