$512.00(USA and Canada only)
Input Range
0to +20 mA with loop sourcing-20 MA至+20 MA
Maximum Over Range
±10％（=±27500个计数）
Resolution
0。8 µA
输入响应时间(% of span/delta I/delta time)
99.9％/19.9 MA/10 ms
Data Freshness
11 ms
DC Common Mode Rejection
>-120 dB
交流通用模式拒绝
>-120 dB @ 60 Hz
Maximum Survivable Input
36 mA or 9 VDC
最大运营Common Mode Voltage
250 V
Accuracy
0。05% (10 µA)
漂移：获取温度Coefficient
30 ppm/°C
DRIFT: Offset TemperatureCoefficient
15 PPM/ °C
Isolation: Optical
4000 V
Isolation: Transformer
1500 V
Isolation: Channel to Channel
250 V continuous（1500 V瞬态）
Power Requirements
5 VDC (±0.15) @ 200 mA
Power Requirements -Loop Power (Input)
From separate field connector:24 VDC nominal (70 mA max @ 24 V input, both loops @ 20 mA),30 VDC maximum
Loop Power (Output)
24 VDC (± 1.5 V) @ 20 mAOpen loop: 30 V maximumShorted loop: 24 mA nominal
LED on top of module
Indicates that there is power to the 24v source supply 2-pin connector
输入电阻
200 ohms (each channel)
Ambient Temperature:OperatingStorage
-20 °C to 70 °C-40 °C to 85 °C
湿度
5-95%, non-condensing
Torque, hold-down screws
Not to exceed 1 in-lb (0.11 N-m)
Torque, connector screws
5.22 in-lb (0.59 N-m)
Wire size range
22 to 14 AWG
Agency Approvals
CE, RoHS, DFARS; UKCAFM (SNAP-AIMA-iSRC-FM only)
Warranty
Lifetime
This document lists and describes all current Opto 22 SNAP PAC System part numbers, including PAC Project software, SNAP PAC controllers, and SNAP I/O modules of all kinds. SNAP PAC mounting racks and SNAP power supplies are also listed.
The isolated analog input modules described in this document are part of Opto 22'sSNAP PAC System。They provide optical isolation, transformer isolation, and channel-to-channel isolation. This data sheet covers the following part numbers:
This document is the Manufacturer's Declaration of Conformity for the products listed herein, in accordance with the rules, regulations and standards of the United Kingdom. The models cited have been tested to the essential requirements listed in the Standards section, and fully comply with the legislation as listed in UK Legislation section.
This document is the Manufacturer's Declaration of Conformity for the products listed herein, in accordance with European, international, and/or national standards and regulations.
This document is a statement of compliance with the EU Directive 2015/863/EU, Restriction of Hazardous Substances (RoHS 3). This document lists Opto 22 products that comply with the substance restrictions of the RoHS 3 directive.
This document lists all Opto 22 part numbers that have Factory Mutual (FM) approval.
This document is the Manufacturer's Declaration for the listed products as mentioned in the attachment - to which this confirmation refers - that they are in accordance with the mentioned European, international and/or national standards and regulations.
This overview describes the four integrated components of the SNAP PAC system: software, controllers, brains and I/O. This hardware and software system is designed for industrial control, remote monitoring and data acquisition.
A quick overview on securing a SNAP Module to a SNAP rack.
A quick overview on removing a SNAP module.
模拟I/O规格中的准确性和分辨率有什么区别？在计算器中尝试自己的规格。
$99.00