$127.00(USA and Canada only)
SNAP D Series
snap-d4m
SNAP-D6M
SNAP-D8M
snap-d12m
Description
4模块架
6模块架
8-module rack
12-module rack
电源要求
5 VDC ± 0.25 VDC@ 200mA max.(700mA with brain board)
5 VDC ± 0.1 VDC@ 300mA max.
5 VDC ± 0.1 VDC@ 400mA max.
5 VDC ± 0.1 VDC@ 1200mA max.
Operating Temperature Range
0 to 70 °C
Relative Humidity
95%, non-condensing
Length (inches)
4.19
5.74
7.74
10.74
Length (mm)
106.43
145.8
196.6
272.8
中心长度
1.98”
3.53“
5.53”
4.26”
# of Center Positions
2
3
The SNAP I/O D Series racks are designed for discrete control applications and can accommodate 4, 6, 8, or 12 SNAP 4-channel digital modules. This data sheet applies to:
This technical note gives an overview of power supplies for use with many Opto 22 control systems and recommends types of power supplies for Opto 22 mounting racks.此注释适用于快照，薄弱，Optomux，Pamux和Direct I/O。它不适用于groovEPIC systems, which have their own integrated power supplies.
This document lists all Opto 22 part numbers that have the Underwriters Laboratory (UL) approval.
This file contains AutoCAD drawings of Opto 22 products dating from 1988 to 2003. These are the same drawings that have been available on our BBS. Included is an Excel file describing the file names and relevant Opto 22 part numbers.
Verifying the voltage level at the I/O rack is very important for equipment safety and point value accuracy. This is the proper technique for reading the voltage level at the rack.
$ 44.00
$22.00