悬停在图像上以放大

snap-idc-32-fm

$ 264.00（仅美国和加拿大）

Availability: 呼吁可用性

Add to cart

SNAP 32-channel Digital (Discrete) Input Module, 10-32 VDC, Factory Mutual Approved

数据表

SNAP-IDC-32-FM 32通道数字输入模块在一个紧凑的SNAP模块中提供32个数字输入通道。SNAP-IDC-32-FM非常适合OEM和其他具有高点计数的应用程序，或者对于那些需要大量数字输入通道I/O机架上的数字输入通道的人。高密度配置通过在同一空间中提供多达八倍的I/O通道来降低数字I/O系统的每点成本。

SNAP PAC系统的一部分，模块安装在一个SNAP PAC架with a SNAP PAC脑或者机架安装的控制器。Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for PC-based control or for use as intelligent remote I/O for anAllen-Bradley Logix Plc系统, such as ControlLogix, MicroLogix, or CompactLogix.

For easy field wiring, use theSNAP-IDC-HDB或者compactSNAP-UDC-HDB突破架和SNAP-HD-BF6header cable. A wiring harness with flying leads (Snap-HD-CBF6）也可用。

The SNAP-IDC-32-FM is Factory Mutual approved. If you do not need FM approval, see thesnap-idc-32反而。

Reference Charts:

在SNAP I/O Configurator。

	snap-idc-32 snap-idc-32-fm	snap-idc-32N	snap-idc-32d	snap-idc-32dN
Input Range	10至32 VDC	-10 to -32 VDC	2。5 to 12 VDC	-2.5至-12 VDC
标称电压范围	24 VDC	-12 to -24 VDC	2。5 VDC	-2.5 VDC
Input Resistance	20K ohms	20K ohms	3 k欧姆	3 k欧姆
逻辑电压和电流	5 VDC±0.1 @ 150 mA		5 VDC±0.1 @ 150 mA
Maximum Operating 通用模式电压	250 v	250 v	250 v	250 v
Isolation: Field to Logic	1500 V	1500 V	1500 V	1500 V
Input Arrangement	32个输入通道；4组8个输入		32个输入通道；4组8个输入
共同的连接	Points in each group share a common negative联系。	Points in each group share a common 积极的联系。	Points in each group share a common negative联系。	Points in each group share a common 积极的联系。
Channel-to-Channel Isolation	没有通道到通道的隔离； 100 V小组隔离		没有通道到通道的隔离； 100 V小组隔离
固定螺丝连接器螺钉	Torque: Not to exceed 1 in-lb (0.11 N-m) Torque: 5.22 in-lb (0.59 N-m)		Torque: Not to exceed 1 in-lb (0.11 N-m) Torque: 5.22 in-lb (0.59 N-m)
Maximum Number of HDD Modules on One Mounting Rack	16	16	16	16
指标	None; use optional OptoTerminal-G20 diagnostic display or breakout rack.
电压	10 VDC @ 0.5 ma	-10 VDC @ 0.5 mA	2。5 VDC @ 0.5 mA	-2.5 VDC @ 0.5 mA
OFF Voltage	3 VDC @ 0.1 mA	-3 VDC @ 0.1 mA	1VDC @ 0.1 mA	-1 VDC @ 0.1 mA
Polling time from I/O processor to module¹	2–30 ms typical²	2–30 ms typical²	2–30 ms typical²	2–30 ms typical²
输入转机/关闭时间	6 ms	6 ms	6 ms	6 ms
计数频率 (DC input)	0–50 Hz @ 50％占空比	0–50 Hz @ 50％占空比	0–50 Hz @ 50％占空比	0–50 Hz @ 50％占空比
工作温度	-20至70°C	-20至70°C	-20至70°C	-20至70°C
Storage Temperature	-40至85°C	-40至85°C	-40至85°C	-40至85°C
Agency Approvals	UL, CE, RoHS, DFARS; UKCA FM (-FM model only)	CE, RoHS, DFARS	CE, RoHS, DFARS	CE, RoHS, DFARS
Warranty	Lifetime	Lifetime	Lifetime	Lifetime
1影响上交和关闭决心 2Time varies based on the SNAP PAC I/O processor (brain or on-the-rack controller), processor configuration, and Ethernet host communication activity.

1778年

模块，电缆和突破板的兼容性图表

This document shows which SNAP I/O modules, breakout boards, and cables can be used together.

View

1633年

Comparison Chart: SNAP 4-Channel and High-Density Digital Modules

This document compares 4-channel and high-density SNAP digital I/O modules.

View

1569年

SNAP PAC系统产品指南

This document lists and describes all Opto 22 SNAP PAC System part numbers, including PAC Project software, SNAP PAC controllers, SNAP PAC brains, and SNAP I/O modules of all kinds. SNAP PAC mounting racks and SNAP power supplies are also listed.

View

1556年

快速高密度数字模块数据表

Opo 22的SNAP I/O高密度数字模块在一个紧凑的SNAP模块中提供16或32个数字输入或输出点。这些模块非常适合OEM和其他具有高点计算应用程序的模块，也适用于单个SNAP PAC架上需要超过64个数字点的任何人。高密度配置通过在同一空间中提供的I/O点的八倍来降低数字I/O系统的每点成本。

SNAP high-density digital modules are part of the SNAP PAC System. They can also be used as part of intelligent remote I/O with an Allen-Bradley Logix PLC system. HDD modules require a SNAP PAC R-series controller or a SNAP PAC brain for I/O processing.

This data sheet covers the following modules:

The data sheet also covers the following accessories used with SNAP HDD modules:

View

1547年

SNAP高密度数字模块用户指南

本指南涵盖了如何安装和测试SNAP 16通道和32通道数字模块，这是SNAP PAC系统的一部分。这些模块在与4通道数字模块同一空间中提供16或32点数字输出或数字输出。它们非常适合OEM和任何需要在单个安装架上需要512个数字积分的人。SNAP高密度数字模块包括以下零件号：

SNAP-IAC-16
SNAP-IAC-A-16
SNAP-IAC-K-16
SNAP-IDC-16
snap-idc-32
snap-idc-32d
snap-idc-32dN
snap-idc-32-fm
snap-idc-32N
snap-odc-32-snk
snap-odc-32-snk-FM
SNAP-ODC-32-SRC
snap-odc-32-src-fm

View

2375

UKCA Declaration of Conformity (EMC, LVD, RoHS)

该文件是根据英国的规则，法规和标准，制造商宣布此处列出的产品的合规性声明。德赢下载引用的模型已经过标准部分中列出的基本要求的测试，并完全符合英国立法部分中列出的立法。

View

2285

Declaration of Conformity (EMC, LVD, RoHS)

该文件是根据欧洲，国际和/或国家标准法规的制造商宣布此处列出的产品的合规性声明。德赢下载

View

1688年

SNAP PAC系统迁移技术说明

本文档描述了为客户与较旧的Opto 22系统集成的客户的迁移选项。它解释了SNAP PAC系统与早期系统的相似性和差异，定义了旧产品，并显示了如何混合旧硬件和新硬件。德赢下载

Customers moving to the SNAP PAC System may also want to consult form #1693, Legacy and Current Product Comparison and Compatibility Charts.

View

1648年

Opto 22 RoHS 3 Statement of Compliance - Restriction of Hazardous Substances

This document is a statement of compliance with the EU Directive 2015/863/EU, Restriction of Hazardous Substances (RoHS 3). This document lists Opto 22 products that comply with the substance restrictions of the RoHS 3 directive.

View

1561年

使用SNAP高密度数字模块的iodisplay 6.0技术说明

该技术说明是针对使用Iocontrol 6.1和Iodisplay 6.0的SNAP高密度数字模块的客户提供的。

View

1059

FM批准文件

本文档列出了具有工厂共同批准的所有Opto 22零件号。

View

0891

CE Declaration: Low Voltage

该文件是附件中提到的列出产品的制造商声明（此确认所指），它们符合上述欧洲，国际和/或国家标准和法规。德赢下载

View

CAD 3D图：SNAP-IDC-32数字输入模块

This CAD file contains a 3-dimensional drawing of thesnap-idc-32digital input module, which provides 32 channels of 10-32 VDC input. This drawing also applies to thesnap-idc-32-fm, which is Factory Mutual approved.

View

Video: SNAP PAC System Overview

This overview describes the four integrated components of the SNAP PAC system: software, controllers, brains and I/O. This hardware and software system is designed for industrial control, remote monitoring and data acquisition.