SNAP-TEX-CBE6
悬停在图像上以放大

SNAP-TEX-CBE6

$152.00(USA and Canada only)

Availability: In stock
8-wire Cable for SNAP I/O Modules, Even Terminals Connected

Production Specification

Part of the SNAP TEX family of mounting and wiring accessories, the SNAP-TEX-CBE6 cable provides neat, protected wiring from the top of a SNAP I/O module to a SNAP TEX breakout board. The cable is six feet (1.8 m) long.

Installation, maintenance, and troubleshooting are faster and simpler using SNAP TEX cables. Each cable snaps into the top of one module and terminates at the breakout board with 18-gauge, color-coded flying leads, already stripped and ready for wiring. The leads attach easily to the breakout board with spring connectors.

NOTE: On the SNAP-TEX-CBE6, even-numbered terminals are connected. Do NOT use the CBE6 with a SNAP-TEX-FB16-H or -L breakout board, since the FB16s have odd-numbered pins connected.

This cable can be used with many digital input modules, some digital outputs, and some analog inputs and outputs. See the data sheet for details.

或查看:Modules, Cables, and Breakout Boards Compatibility Charts

Build your system in theSNAP I/O Configurator.

Feature

SNAP-TEX-CBO6

SNAP-TEX-CBE6

SNAP-TEX-CBS6

Cable length

6 feet (1.8 meters)

6 feet (1.8 meters)

6 feet (1.8 meters)

Connector

8 pins, 0.2 in. (5.08 mm) center-to-center

8 pins, 0.2 in. (5.08 mm) center-to-center

8 pins, 0.2 in. (5.08 mm) center-to-center

Wires

8 pre-stripped, color-coded, 18 gauge

8 pre-stripped, color-coded, 18 gauge

8 pre-stripped, color-coded, 18 gauge

Bussing

Odd-numbered pins connected

Even-numbered pins connected*

No connected

Agency Approvals

CE, RoHS, DFARS

CE, RoHS, DFARS

CE, RoHS, DFARS

Warranty

30个月

30个月

30个月

*Do NOT USE the CBE6 with a SNAP-TEX-FB16-H or -L breakout board. The FB16s have odd-numbered pins connected.

SNAP TEX Cables Installation Note

SNAP TEX cables make wiring to field devices easier. This installation note shows how to install the following cables:

Opto 22 RoHS 3 Statement of Compliance - Restriction of Hazardous Substances

This document is a statement of compliance with the EU Directive 2015/863/EU, Restriction of Hazardous Substances (RoHS 3). This document lists Opto 22 products that comply with the substance restrictions of the RoHS 3 directive.

CE Declaration: Component

This document is the Manufacturer's Declaration for the listed products as mentioned in the attachment - to which this confirmation refers - that they are in accordance with the mentioned European, international and/or national standards and regulations.

No downloads are available for this product.

Video: Spring Clamps - Quick Tip

A quick tip on spring clamps.

Video: SNAP TEX Wiring and Mounting Accessories

快速概述快速Tex接线和安装配件。