$ 578.00(USA and Canada only)
输入
12-bit serial data (each channel)
Outputs
4 to 20 mA (each channel)
Span
16 ma
解析度
3.9微型
Response Time(% of span/delta I/ delta time)
99.9%/15.98 mA/3 mS
DC Common Mode Rejection
>-120 dB
AC Common Mode Rejection
>-120 dB @ 60 Hz
Maximum Operating通用模式电压
250 v
Common Mode Resistance
>1000 Megohms
准确性
0.1% of Span
Gain Temperature Coefficient
50 ppm/°C
抵消温度系数
20 ppm/°C
最大限度。循环阻力@循环供应
950欧姆
Ambient Temperature:操作Storage
-20 °C to 70 °C-40 °C to 85 °C
Humidity
5-95％，不调节
Isolation: Optical
4000 v
Isolation: Transformer
1500 V
隔离：通道通道
250 V连续(1500 V transient)
电源要求
5 Volts DC (±0.15) @ 200 mA
电源要求-循环功率（输入）
From separate field connector;24 VDC nominal (70 mA max)@ 24 V input, both loops@ 20 mA), 30 VDC maximum
循环功率（输出）
24 VDC (±1.5 V) @ 20 mAOpen loop: 30 V maximumShorted loop: 24 mA nominal
LED on top of module
表明24V源电源2针连接器有电源
Agency Approvals
CE，ROHS，DFARS，UKCA
FM (SNAP-AOA-23-iSRC-FM only)
扭矩，固定螺丝
不超过1英寸（0.11 n-m）
扭矩，连接器螺钉
5.22 in-lb (0.59 N-m)
Wire size range
22 to 14 AWG
Warranty
Lifetime
This document lists and describes all Opto 22 SNAP PAC System part numbers, including PAC Project software, SNAP PAC controllers, SNAP PAC brains, and SNAP I/O modules of all kinds. SNAP PAC mounting racks and SNAP power supplies are also listed.
SNAP I/O analog output modules are part of Opto 22's SNAP PAC System. This document includes descriptions, specifications, and wiring and dimensional diagrams for all SNAP analog output modules:
该文件是根据英国的规则，法规和标准，制造商宣布此处列出的产品的合规性声明。德赢下载引用的模型已经过标准部分中列出的基本要求的测试，并完全符合英国立法部分中列出的立法。
This document is a statement of compliance with the EU Directive 2015/863/EU, Restriction of Hazardous Substances (RoHS 3). This document lists Opto 22 products that comply with the substance restrictions of the RoHS 3 directive.
This document lists all Opto 22 part numbers that have the Underwriters Laboratory (UL) approval.
This document is the Manufacturer's Declaration for the listed products as mentioned in the attachment - to which this confirmation refers - that they are in accordance with the mentioned European, international and/or national standards and regulations.
This CAD file contains a 3-dimensional drawing of thesnap-aoa-23-isrcanalog output module, which provides two isolated channels of current output with a nominal output range of 4 mA to 20 mA and also includes built-in loop sourcing capability.
This drawing also applies to thesnap-aoa-23-isrc-FM, which is Factory Mutual approved.
该CAD文件包括适用于大多数SNAP模拟和数字I/O模块的图纸。
This overview describes the four integrated components of the SNAP PAC system: software, controllers, brains and I/O. This hardware and software system is designed for industrial control, remote monitoring and data acquisition.
A quick overview on securing a SNAP Module to a SNAP rack.
What's the difference between accuracy and resolution in analog I/O specifications? Try your own specs in the calculator.
$99.00
$121.00