悬停在图像上以放大

SNAP-IDC5-FAST-A

$ 68.25（仅美国和加拿大）

Availability: In stock

Add to cart

SNAP 4-Ch High-Speed 18-32 VDC Digital (Discrete) Input Module

数据表

The SNAP-IDC5-FAST-A provides four channels of high-speed 18-32 VDC digital input. Each channel senses the on/off status for DC voltages from sources such as proximity switches, push buttons, or auxiliary contacts. The module has removable top-mounted connectors for easy access to field wiring, as well as channel-specific LEDs for convenient troubleshooting.

SNAP PAC系统的一部分，模块安装在一个SNAP PAC rackwith a SNAP PAC脑或者机架安装的控制器. Analog, digital, and serial I/O modules can all be on the same rack. Such an I/O unit is also well suited for PC-based control or for use as intelligent remote I/O for anAllen-Bradley Logix Plc系统, such as ControlLogix, MicroLogix, or CompactLogix.

For easier, faster wiring, see SNAP TEX电缆和breakout boards.

在SNAP I/O Configurator.

	SNAP-IDC5FAST*	SNAP-IDC5-FAST-A**	snap-idc5ma
Key Feature	高速	高速	Diagnostic switches
电线尺寸	22 to 14 AWG	22 to 14 AWG	22 to 14 AWG
扭矩，固定螺丝	不超过1英寸（0.11 n-m）	不超过1英寸（0.11 n-m）	不超过1英寸（0.11 n-m）
扭矩，连接器螺钉	5.22英寸LB（0.59 N-M）	5.22英寸LB（0.59 N-M）	5.22英寸LB（0.59 N-M）
现场侧等级（每个通道）
Nominal Input Voltage	5 VDC	28 VDC	24 VAC/VDC
通道到通道隔离	300 VAC （1,500 V瞬态）	300 VAC （1,500 V瞬态）	300 VAC （1,500 V瞬态）
Input Voltage Range	2.5–16 VDC	18–32 VDC	10–32 VAC/VDC
Turn-on Voltage	2.5 VDC	18 VDC	10 VAC/VDC
关闭电压	1 VDC	5 VDC	3 VAC/VDC
Input Resistance	440 ohms (nominal)	8 K ohms (nominal)	15 K ohms (nominal)
逻辑Side Ratings
逻辑输出电压	<0.5 V max. (on) @ 2 mA sinking 2.7 v分钟。（离开） @ 0.4 mA sourcing	<0.5 V max. (on) @ 2 mA sinking 2.7 v分钟。（离开） @ 0.4 mA sourcing	<0.5 V max. (on) @ 2 mA sinking 2.7 v分钟。（离开） @ 400 mA sourcing
逻辑Supply Voltage***	5 VDC±0.25 VDC	5 VDC±0.25 VDC	5 VDC±0.25 VDC
逻辑Supply Current	50 mA maximum	50 mA maximum	50 mA maximum
Negative True Logic 输出驱动器	TTL 74系列= 1 UL TTL 74LS Series = 5 UL	TTL 74系列= 1 UL TTL 74LS Series = 5 UL	TTL 74系列= 1 UL TTL 74LS Series = 5 UL
Module Ratings
每个模块的频道数量	4	4	4
转交时间	0.025 msec*	0.025毫秒**	5毫秒
Turn-off Time	0.025 msec*	0.025毫秒**	15 msec
光学隔离 (Field Side to Logic Side)	4,000 volts (transient)	4,000 volts (transient)	4,000 volts (transient)
温度	-20 °C to 70 °C, operating -40 °C to 85 °C, storage	-20 °C to 70 °C, operating -40 °C to 85 °C, storage	-20 °C to 70 °C, operating -40 °C to 85 °C, storage
Agency Approvals	UL, CE, FM, CSA, RoHS, DFARS; UKCA	UL, CE, CSA, RoHS, DFARS; UKCA	CE, RoHS, DFARS; UKCA
Warranty	Lifetime	Lifetime	30个月
* At 20kHz, 5Vp-p square wave input, 50% duty cycle. At 20kHz, 28Vp-p square wave input, 50% duty cycle. * When used with an I/O processor (brain or on-the-rack controller), the processor requires 5.0 to 5.2 VDC.

1569年

SNAP PAC系统产品指南

This document lists and describes all Opto 22 SNAP PAC System part numbers, including PAC Project software, SNAP PAC controllers, SNAP PAC brains, and SNAP I/O modules of all kinds. SNAP PAC mounting racks and SNAP power supplies are also listed.

View

0773

SNAP Digital Input Modules Data Sheet

SNAP digital input modules are designed to work withSNAP PAC racks和can sense either AC or DC signals.

All SNAP digital input modules are compatible withSNAP PAC brains和R-series controllers, including Wired+Wireless models.

Most digital input modules are also compatible with SNAP D-series or legacy M-series and B-series racks and with the brains that mount on them.

该数据表适用于：

View

2375

UKCA Declaration of Conformity (EMC, LVD, RoHS)

该文件是根据英国的规则，法规和标准，制造商宣布此处列出的产品的合规性声明。德赢下载引用的模型已经过标准部分中列出的基本要求的测试，并完全符合英国立法部分中列出的立法。

View

2285

Declaration of Conformity (EMC, LVD, RoHS)

该文件是根据欧洲，国际和/或国家标准法规的制造商宣布此处列出的产品的合规性声明。德赢下载

View

1784年

RPM测量技术

This technical note discusses field devices and methods for measuring the rotational speed of a shaft in revolutions per minute (RPM). RPM measurement is important when controlling or monitoring the speed of motors, conveyors, turbines, etc.

View

1648年

Opto 22 RoHS 3 Statement of Compliance - Restriction of Hazardous Substances

This document is a statement of compliance with the EU Directive 2015/863/EU, Restriction of Hazardous Substances (RoHS 3). This document lists Opto 22 products that comply with the substance restrictions of the RoHS 3 directive.

View

1058

CSA Approval Document

本文档列出了所有具有加拿大标准协会（CSA）批准的Opto 22零件号。

View

1057

UL Approval Document

This document lists all Opto 22 part numbers that have the Underwriters Laboratory (UL) approval.

View

0892

CE Declaration: EMC

该文件是附件中提到的列出产品的制造商声明（此确认所指），它们符合上述欧洲，国际和/或国家标准和法规。德赢下载

View

0891

CE Declaration: Low Voltage

该文件是附件中提到的列出产品的制造商声明（此确认所指），它们符合上述欧洲，国际和/或国家标准和法规。德赢下载

View

CAD Drawing: SNAP I/O Module

该CAD文件包括适用于大多数SNAP模拟和数字I/O模块的图纸。

View

Video: SNAP PAC System Overview

This overview describes the four integrated components of the SNAP PAC system: software, controllers, brains and I/O. This hardware and software system is designed for industrial control, remote monitoring and data acquisition.