KB90286
Published: November 18, 2022
Revision: 2.0

在控制器的消息队列中,将字符附加到字符串命令在-95信息消息中结果


Applies To:

  • PAC Control Professional
  • PAC控制基本

受影响的版本:

R10.4C(可能发生在早期版本中)

在版本中解决:

R10.5A


Symptoms:

如果为参数0指定一个64位整数附加到字符串命令,PAC控制编译而无需报告您只能为参数指定32位浮点或整数。。

Workaround:

对于参数0,仅指定一个32位整数或浮点。

Resolution:

Opto 22解决了这个问题。

Questions?

联系人:Opto 22产品支持。
Phone: 800-835-6786 or 951-695-3080
电子邮件:support@opto22.com


DISCLAIMER

This Opto 22 Knowledge Base ('OptoKB') article is intended to provide general technical information on a particular subject or subjects and is not an exhaustive treatment of such subjects. Accordingly, the information in this OptoKB article is not intended to constitute application, design, software, or other professional engineering advice or services. Opto 22 may modify the OptoKB articles at any time. Before making any decision or taking any action which might affect your equipment, you should consult a qualified professional.

OPTO 22 DOES NOT WARRANT THE COMPLETENESS, TIMELINESS, OR ACCURACY OF THE DATA CONTAINED IN THIS OPTOKB ARTICLE AND MAY MAKE CHANGES THERETO AT ANY TIME AT ITS SOLE DISCRETION WITHOUT NOTICE. FURTHER, ALL INFORMATION CONVEYED HEREBY IS PROVIDED TO USERS 'AS IS.' IN NO EVENT SHALL OPTO 22 BE LIABLE FOR ANY DAMAGES OF ANY KIND INCLUDING DIRECT, INDIRECT INCIDENTAL, CONSEQUENTIAL, LOSS PROFIT, OR DAMAGE, EVEN IF OPTO 22 HAS BEEN ADVISED ON THE POSSIBILITY OF SUCH DAMAGES.

Opto 22不对信息(包括硬件,软件和/或固件)表示明示或暗示的所有保证,包括针对特定目的,商标和非侵权的暗示保证。请注意,某些司法管辖区不批准排除隐含的担保:因此,此免责声明可能不适用于您。

版权所有©2023 Opto 22.保留所有权利。